GOWProp 8.0 Download

GOWProp 8.0 Description

"This module lets you calculate gas and liquid physical properties.Gas calcula..."

Edit By BS Editor: Program GOWProp is a Physical Properties program that calculates PVT properties of gas, oil, and water with your choice of calculation methods. Pick from a selection of standard equations for calculating certain properties. More than 12 properties are calculated and the results include a pressure depletion table of the various properties and will plot the output on screen. U.S. and SI Units.

Oil properties are calculated based on a black-oil model. In fluid-property terms the black-oil model employs 2 Pseudo-components:
1) "OIL" defined as produced oil at stock tank conditions
2) "GAS" defined as produced separator gas
The basic assumption is that gas may dissolve in the oil phase, but oil will not dissolve in the gas phase. For mixtures of heavy oil and light components this is a reasonable assumption, but is a misleading assumption for mixtures of light and intermediate components.
The following fluids are included:
Gases:
- Natural gas
- Nitrogen
- Air
Liquids:
- Oil
- Water
- Methanol/Water mixtures
- Monoethylene glycol/Water mixtures
- Diethylene glycol/Water mixtures
- Triethylene glycol/Water mixtures
GOWProp will let you choose Between SI-units (metric) or Customary units.
The gas property routine calculates:
- Molecular weight
- Density
- Compressibility
- Gas formation volume Factor
- Z-factor (gas deviation factor)
- Viscosity
- Thermal conductivity
- Specific heat
- Ideal isentropic coefficient, Cp/Cv
- Real isentropic coefficient, k
- Pseudo Critical properties
- Pseudo Reduced properties
The liquid property routine calculates:
- API gravity (for oil only)
- Density
- Compressibility
- Formation volume factor (oil and water only)
- Solution gas-liquid ratio (oil and water only)
- Bubble point pressure (oil only)
- Viscosity
- Thermal conductivity
- Surface tension
- Specific heat you can free download GOWProp 8.0 now.

GOWProp 8.0 Keywords

GOWProp 8.0 Related Software

• GOWProp
  This module lets you calculate gas and liquid physical properties.Gas calcula...
• AGA3
  Compute and measure orifice plates for gas and liquid.
• ISO-5167 2003
  Compute and measure orifice plates for gas and liquid.
• AGA-3
  Compute and measure orifice plates for gas and liquid.
• WatGas
  Calculate hydrates, water content, flowline inhibitor, CO2 solids.
• GOWProp
  This module lets you calculate gas and liquid physical properties.Gas calcula...