GClip 1.0 Download

GClip 1.0 Description

"GClip is a wave-shaping signal clipper."

EditByBSEditor: GClip is a wave-shaping signal Clipper. It prevents the signal level from exceeding a specified maximum. The clipping function used can be altered to have a hard- or soft-knee.

Hints
The GUI features a wave display to aid configuration. Simply play the audio and watch the wave display while you set the desired values for input gain, clip-level and softness.
When using GClip for more extreme wave-shaping, the oversampling mode can reduce aliasing for a warmer sound.
Interface


The display features three main areas. At the top-left is the graph display, to the right is the wave display and at the bottom-left are the parameter controls.

Graph Display: This shows the shape of the clipping function that is applied to incoming samples. All three knobs affect the shape of this curve.

Wave Display: This shows the waveform of the signal after the input gain has been applied. Superimposed over that is the output signal, after clipping. So you get a before and after display. The clipping level is also displayed as a solid horizontal line.

Gain: This allows you to raise the signal level before clipping.

Clip: The clipping level as a percentage of the maximum sample value. So, if you consider samples to go from -1 to 1, then a clipping level of 50% will restrict all samples to Between -0.5 and 0.5.

Softness: This parameter sets the shape of the "knee" of the clipping function. If this parameter is 0% then GClip behaves as a simple signal clipper, truncating samples that exceed the clipping level. Greater values for softness will cause samples approaching the clipping level to be affected.

2x Oversample: Turn oversampling on or off. Wave-shaping can introduce audible aliasing, especially with more drastic settings. The oversampling mode can help to minimize aliasing in such cases. you can free download GClip 1.0 now.

GClip 1.0 Keywords

GClip 1.0 Related Software

• GNormal
  GNormal tries to remedy denormal problems.
• GComp
  GComp is a general-purpose compressor that offers a host of very useful features
• GGain
  t's a volume knob. A knob to control volume. You know, also known as
• GDelay
  GDelay is a digital delay effect, with the option to feed the resulting signal.
• GFader
  It's a volume knob. A knob to control volume. You know, also known as
• 
  GSnap is an auto-tune effect.
• GRevDly
  GRevDly is a delay effect that plays the delayed signal in reverse.
• GComp2
  GComp2 is a simplified compressor that also includes lo- and hi-cut filters.
• GChorus
  GChorus is a traditional chorus effect.
• GSinth
  GSinth is a monophonic VSTi with three sine oscillators.
• GBand
  GBand is a resonant band-pass filter.
• GTune
  GTune is a chromatic instrument tuner which operates much like similar hardware.
• GLow
  GLow is a resonant low-pass filter.
• GClip
  GClip is a wave-shaping signal clipper.
• GGate
  GGate is a noise gate.
• GMax
  GMax is a maximizing limiter.
• GDuckDly
  GDuckDly is a digital delay that allows the wet signal to be compressed.
• Gsmith2
  GSinth2 is a monophonic VSTi with three oscillators.
• GMulti
  GMulti is a three-band compressor with stereo enhancement.
• GGrain
  GGrain is a granular resynthesis effect.